Olarm FitX

Datasheet

White electronic door lock with a keypad and a keyhole at the bottom.

Important

The Olarm FitX requires an Olarm HUB with an active subscription. You can purchase a subscription through your installer, alarm response company, or directly in the Olarm APP.

Perfect for:

Residential security

Windows, Driveways, Entrances, Side alleys, Pool fencing, Gates, Garden paths

‍

Commercial security

Shop fronts, Display windows, Entrances, Corridors, Construction sites, Temporary installs

Your security advantage, simplified

Installs in minutes

QR code pairing via Olarm APP

Olarm HALO secure long range wireless technology

Cover large properties up to 2km

Wirelessly configure your detector via Olarm APP

Change sensitivity, range, and other settings remotely - no DIP switches required.

Battery health

Monitor battery status and get notified when your battery is running low.

Coverage

Diagram showing a 2-meter detection length with top view illustrating 95° adjustable range and side view displaying detection range from 0.8m to 1.2m with person and dog silhouettes.

Diagram showing a 5m detection length with a top view illustrating an adjustable 95-degree range and side view indicating detection height between 0.8m and 1.2m targeting humans and dogs.

Pet tolerance: Large

System capabilities

Features

FTN-R-PT

FTN-RAM-PT

Indoor / Outdoor

Outdoor

Detection Type

Curtain

# of Independent Zones

Lens blocking detection

Application detection & height

Features

FTN-R-PT

FTN-RAM-PT

Mounting Height

0.8 - 1.2 m

Sensitivity

2.0°C (at 0.6 m/s) (3.6°F (at 2'/s))

Narrow Detection Angle

5° Adjustable within bracket (190˚)

Narrow Detection Range

2 or 5m

Line of Defence Protection

Curtain

PIR features & specifications

Features

FTN-R-PT

FTN-RAM-PT

LED indicator

Pet tolerant

Wall Tamper

LID Tamper

Radio / wireless technologies

Type Approval Note: Type Approval may be required in your country/region. Please contact our sales team to confirm regional support.

Connectivity

Antenna Type

Tamper proof internal

Bluetooth

BLE 5

Olarm HALO

Olarm's proprietary long range and low power secure communication protocol

Olarm HALO - Wireless Protocol

Olarm HALO is the invisible thread that keeps all your security devices connected over long distances with minimal power usage.

Modulation

LoRa

Frequency Range

863-870

MHz

Bandwidth

125 kHz

Range

Up to 2km (line of sight)

Key Features

Secure, long-range encrypted wireless technology

Continuous device health monitoring

Automatically monitors for tampering, battery, and signal issues

Superior resistance to interference & signal jamming

Dual wireless channels for maximum reliability

Constant connection with reliable check-ins

Bluetooth Low Energy (BLE)

Standard

Bluetooth 5.0 Low Energy

Purpose

Firmware updates

Antenna Type

Tamper resistant internal

Data Rates

Up to 2 Mbps (Bluetooth 5.0 LE 2M PHY), 1 Mbps standard BLE

Tx Power

Up to +6 dBm

Rx Sensitivity

Approximately -96 dBm at 1 Mbps

Range

Up to 100m typical

Encryption

AES-128

Olarm APP - View events

Features

FTN-R-PT

FTN-RAM-PT

Zone Alarm (No Detection/Detection)

Tamper (Cover & Wall) (Single Sensor)

Lens blocking detection

Battery Voltage (via Olarm Connect)

Olarm APP - Set general device settings

Features

FTN-R-PT

FTN-RAM-PT

LED (OFF/ON)

Detection rest period (0 - 255)

Olarm APP - Set PIR settings via Mobile App

Features

FTN-R-PT

FTN-RAM-PT

Lens blocking detection (ENABLE/DISABLE)

PIR sensitivity (LOW/MID/HIGH)

PIR extreme high (OFF/ON)

OPTEX indicated battery and power usage

Features

FTN-R-PT

FTN-RAM-PT

Power input

3 to 9 V DC

Current draw

9μA(at stand-by) /
3mA(max.)(at 3 V DC)

10μA(at stand-by) /
3mA(max.)(at 3 V DC)

Connectors

Olarm CONNECT connects to the Optex detector through the Serial Port only. This provides full wireless remote configuration support. Other ports shown are not used.

Features

FTN-R-PT

FTN-RAM-PT

Serial Port

Yes

Power

Red / black (4 pin)

Alarm

Yellow + White (4 pin) incl Power

Trouble

Green / Blue (2pin)

Packaging

Features

FTN-R-PT

FTN-RAM-PT

Packaged weight incl. batteries

327g

Packaged dimensions (Length x Width x Depth)

221 x 103 x 89 mm

Device weight (without wireless transmitter and battery)

180g

Device dimensions (Height x Width x Depth)

176.4 x 52.6 x 67.5 mm

Enclosure material

TBC

TBC

What's included in the box

1 x Olarm FitX

1 x Olarm CONNECT transmitter

1 x Optex integration serial cable

2 x screws 3 x 20mm

2 x CR123A battery

Certifications, accreditations & test reports

Olarm CONNECT meets international safety, security, and wireless communication standards. These certifications ensure the device is safe to use, won't interfere with other devices, and meets regulatory requirements in your region.

Type Approval

ICASA TA-2025/2247

Safety & Health

EN IEC 62368-1:2020+A11: (2020)

IEC 62368-1: (2014)

UN38.3 (CR123A Battery)

RF Exposure / SAR

EN 62311:2022

Electromagnetic Compatibility (EMC)

ETSI EN 301 489-1: V2.2.3 (2019-11)

ETSI EN 301 489-3: V2.1.1 (2019-03)

ETSI EN 301 489-17: V3.2.4 (2020-09)

Radio Spectrum Efficiency

ETSI EN 300 220-1: V3.1.1 (2017-02)

ETSI EN 300 220-2: V3.2.1 (2018-06)

ETSI EN 300 328: V2.2.2 (2019-07)

More info

Manufacturer

OPTEX Co., Ltd.

5-8-12 Ogoto, Otsu, Shiga, 520-0101, Japan

Importer