Datasheet
Olarm PRO 4G is a multi-channel dual SIM 4G / 2G and WiFi communicator. It enables the monitoring and control of a wide range of security peripherals, enabling users to effectively manage systems, such as alarm panels and electric fences.
Note:
Olarm PRO requires an active subscription to function. You can purchase a subscription through your installer, Alarm response company or directly in the Olarm APP.

Supported peripherals
Olarm LINK support
Olarm LINK extends the power of Olarm PRO, letting you control devices with actions like on, off, latch, or pulse — all from one smart, seamless connection.
For alarm panels
Paradox
MG5050, MG5050+, SP6000, SP6000+**, SP65, EVO192***
* Minimum panel firmware v1.11.001
** Minimum panel firmware v1.10.004
***Requires and adapter board when panel version is 7.5
DSC
PC1555, PC1616, PC832, PC864, PC1808, PC1832, PC1864, PC5005, PC5010, PC5015, PC5020
* Requires an adapter board - sold separately.
Texecom
Premier 412, Premier 816, Premier 816 PLUS, Premier 832
Elite 24, Elite 48, Elite 64, Elite 88, Elite 168
Premier 168 - Coming Soon
Elite 640 - Coming soon
IDS
805, 806*, X16*, X64*, X64 Serial*
* Requires an adapter board - sold separately.
Feature
Paradox
IDS
Texecom
DSC
Area & Zone sync
Multi-area control
Arm
Disarm
Stay arm
Part arm
Zone status
AC status
Bypassing
PGM
Remote programming
Alarm panels compatible with Olarm PRO
Paradox
Texecom
IDS
MG5050
Premier 412
806
MG5050+
Premier 816
X16
SP6000
Premier 816 PLUS
X64
SP6000+
Elite 24
X64 SERIAL
SP65
Elite 48
EVO192
Elite 64
Elite 88
Elite 168
For Nemtek electric fences
Supported models
Druid D13, D15, D18, D20, D25, D28
Merlin 4i
Merlin Stealth M28S, M28X
Status
Druid
Merlin
Merlin stealth
Fence/Zone state
Fence voltage mode
AC power
Battery status
Service state
Gate status
Tamper
Energizer
Druid
Merlin
Merlin stealth
Turn on /off
Clear / Reset
Siren/Strobe - enable/disable
Service alarms - bypass/reset
Fence voltage - set high/low
Zones
Druid
Merlin
Merlin stealth
Turn on /off
Bypass/unbypass
Set voltage - high/low
Gate alarm
Druid
Merlin
Merlin stealth
Set immediate/delayed
Chime enable/disable
For JVA electric fences
Supported models
Z-Range: Z11, Z13, Z14, Z18, Z28
Currently only supported on Olarm PRO 4G
Requires special firmware, please contact support for updates
Status
Z Range
Fence/Zone state
AC power status
Battery status
Energizer
Z Range
Turn on/off
Clear/reset
Siren/strobe - enable/disable
Fence voltage - set high/low
Zones
Z Range
Turn on/off
Set voltage - high/low
Feed/return voltage
Peripheral connection
Protocols
Serial & Keybus depending on peripheral make & model
Standard cable length
1.5m
Maximum cable length
8m
Connectors
1 x 4 pin white Molex connector
1 x 5 pin white Molex connector
See installation guide for more information
Signals
Contact ID
Remote Connect serial bridge
Using Olarm Remote Connect, remotely access serial ports for remote management.
Software supported
Babyware
Wintex
IDSwift
Mechanical specifications
Packaged weight
180g
Packaged dimensions
150 x 150 x 46mm
Device weight
93g
Cable weight
40g
Device dimensions
125mm diameter & 33.5mm height
Enclosure material
ABS - Resin MG47F
Status indicator
RGB LED
Power supply
Voltage
7 to 24VDC
Typically supplied from the alarm panel / electric fence energizer via the cable provided.
Operating conditions
Temperature
–40 to 60°C
Humidity
0 - 90% RH
Radio / wireless technologies
Connectivity
4G, 2G & Wifi
Simultaneous multi-path routing via both channels.
Mobile connectivity - 4G & 2G
2G and/or 4G depending on model & coverage.
Antenna type
Internal
External antenna connecter
LTE-FDD: B1/B3/B5/B7/B8/B20
2G: GSM900, DCS1800
Sim Cards
South Africa
2 x Olarm managed local SIMS
Global
1 x Olarm managed roaming SIM
Mobile network switching
<60s (Depending on network availability)
Wifi
WiFi standards
2.4GHz only - IEEE 802.11b/g/n
Center frequency range of operating channel
2412 ~ 2484 MHz
Antenna type
Internal
Data rate - 20MHz
11b: 1, 2, 5.5 and 11 Mbps
11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
11n: MCS0-7, 72.2 Mbps (Max)
Data rate - 40MHz
11n: MCS0-7, 150 Mbps (Max)
Tx Power
13 to 19.5 dB (Data rate dependant)
Rx Sensitivity
-69 to -97 dBm (Data rate dependant)
Encryption
WPA2-PSK
WPS set up
Yes
Encryption
TLS 1.2 / AES-128
Configuration
Plug-and-play zero configuration via QR Code Scan in the Olarm APP.
Olarm APP users
Unlimited
The Olarm PRO 4G will require an active subscription to function. Please contact your installer or speak to sales@olarm.com for more information.
Included in the box
1x Olarm PRO 4G
1x Reversible 1.5m Peripheral cable
1x Mounting Template: Drill hole template and LED colour legend
Mounting hardware
Certifications, accreditations & test reports
Safety & health
EN 62368-1:2014+A11: (2017)
IEC 62368-1: (2014)
Electromagnetic compatibility
ETSI EN 301 489-1: V2.2.3 (2019-11)
ETSI EN 301 489-3: V2.1.1 (2019-03)
ETSI EN 301 489-17: V3.2.4 (2020-09)
ETSI EN 301 489-52: V1.1.0 (2016-11)
EN 50130-4: 2011+A1: (2014)
Radio spectrum efficiency
ETSI TS 151 010-1 V12.8.0 (2016-05)
ETSI EN 300 220-1: V3.1.1 (2017-02)
ETSI EN 301 511: V12.5.1 (2017-03)
ETSI EN 300 220-2: V3.2.1 (2018-06)
ETSI EN 300 328: V2.2.2 (2019-07)
ETSI EN 301 908-1: V13.1.1 (2019-11)
ETSI EN 301 908-13: V13.0.1 (2019-08)